Product Advantages: Grade A Cell, Enough Capacity, Excellent High Discharge Rate, Extra-Low Internal Resistance, 500+ Long Cycle Life.
Nominal voltage | 44.4V |
Typical capacity | 16000mAh |
Configurations | 12S1P |
Cell type | Li-ion polymer |
Positive material | Pure lithium cobalt |
Energy | 710Wh |
Max discharge rate | 18C |
Max discharge current | 280A |
Charging time | Approx 3.0 hours (0.5C) |
Standard charge current | 16000mA (1C) |
Max charge current | 32000mA (2C) |
Discharge connector | XT90/XT150/AS150/EC5 |
Charging(balancing) connector | JST-XHP-15pin |
Operating temperature range | -20℃ ~ 60℃ |
PVC color | Silver or white or black |
Battery size | 186L x 76D x143W mm |
Battery weight | 4100g |
Product advantages | Grade A cell |
Enough capacity | |
Excellent high discharge rate | |
Extra-low internal resistance | |
500+ long cycle life |
ITEM | Cell Parameters | 9788188HP | |
Capacity |
Typical | 16934mAh |
0.2C Discharge cut-off Voltage 3.0V after standard charge at 23±2℃ |
Minimum | 16050mAh | ||
Nominal capacity | 16000mAh | ||
Nominal Voltage | 3.7V | ||
Open-circuit voltage | 3.70V~3.90V | Test the cell voltage within 1 month since the delivery day at 23±2℃ | |
Impedance | ≤1.0mΩ | AC 1kHz at 23±2℃ | |
Charging Cut-off Voltage | 16000mA | 1C | |
Standard charge current | 80.0A | Ref.Temperature:10~50℃ | |
Max. Charge Current | 400.0A | 25C | |
Standard discharge current | 3.5V | ||
Max. Constant Discharge Current | 8000mA | 0.5C | |
Burst Discharge Current | 16000mA | 1C | |
Discharge Cut-off Voltage | 4.2V | ||
Product Size | 9.7*88.0*188.0mm | Max | |
Weight | 338g | ±8.5g | |
Range Of Operating Temperature | Discharge | 10~45℃ | |
Discharge | -20~60℃ | ||
Testing method Standard test conditions: The cell for test must be new produced no more than 1 month and charge-discharged less than 5 cycles. Unless otherwise specified, all tests stated in this Specification shall be conducted at the temperature of 23±2℃ and the relative humidity of 45%~65%RH, and atmospheric pressure is 86kPa~106kPa。 Measuring Equipments (1) Slide caliper should have an accuracy of the grade 0.01mm or higher. (2) The multimeter should have an accuracy of the grade 0.5 or higher. The impedance when testing voltage should be more than 10KΩ/V. (3) The impedance meter with AC 1 kHz should be used. (4) For the cell testing system, the accuracy of current should be more than ±0.1%, the accuracy of voltage should be more than ±0.5% and the accuracy of time should be more than ±0.1%. (5) The thermometer should be have an accuracy of the grade 0.5℃ or higher. Standard Charge 1.0C Charge to 4.2V(CC-CV) ,Cut-off current is 0.02CmA。 Standard Discharge 1.0C Discharge cut-off Voltage 3.0V. Rest Time Unless otherwise specified, between cell charging and discharging, there is a 30min interval. |
Product Type | Description | Cell and configure | Cell type | Volt range | Temperature range |
Dimension mm |
Weight | Discharge | Charge speed |
Package material |
BMS function |
Max current |
Max current | ||||||||||
Standard Drone Battery | 8.3Ah 22.2v 6s 30C |
6265188XL-8.3Ah,3.7V, 30C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 203*68*41 | 1.1kg | 240A | 2C |
PVC heat shrink |
balance charge |
8.3Ah 25.9v 7s 30C |
6265188XL-8.3Ah,3.7V, 30C 7s1p |
LiCoO2 lipo |
24.5v-29.4v | (-20℃~60℃) | 203*68*47 | 1.3kg | 240A | 2C |
PVC heat shrink |
balance charge | |
8.3Ah 44.4v 12s 30C |
6265188XL-8.3Ah,3.7V, 30C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 203*68*76 | 2.1kg | 240A | 2C |
PVC heat shrink |
balance charge | |
8.3Ah 51.8v 14s 30C |
6265188XL-8.3Ah,3.7V, 30C 14s1p |
LiCoO2 lipo |
49V-58.8V | (-20℃~60℃) | 203*68*89 | 2.45kg | 240A | 2C |
PVC heat shrink |
balance charge | |
10Ah 22.2v 6s 25C |
8365188HP-10Ah,3.7V, 25C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 203*68*52 | 1.4kg | 250A | 2C |
PVC heat shrink |
balance charge | |
10Ah 25.9v 7s 25C |
8365188HP-10Ah,3.7V, 25C 7s1p |
LiCoO2 lipo |
24.5v-29.4v | (-20℃~60℃) | 203*68*61 | 1.62kg | 250A | 2C |
PVC heat shrink |
balance charge | |
10Ah 44.4v 12s 25C |
8365188HP-10Ah,3.7V ,25C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 203*68*99 | 2.7kg | 250A | 2C |
PVC heat shrink |
balance charge | |
10Ah 51.8v 14s 25C |
8365188HP-10Ah,3.7V ,25C 14s1p |
LiCoO2 lipo |
49V-58.8V | (-20℃~60℃) | 203*68*116 | 3.14kg | 250A | 2C |
PVC heat shrink |
balance charge | |
12Ah 22.2v 6s 25C |
10270169HP-12Ah,3.7V, 25C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 185*72*63 | 1.68kg | 300A | 2C |
PVC heat shrink |
balance charge | |
12Ah 44.4v 12s 25C |
10270169HP-12Ah,3.7V, 25C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 185*72*122 | 3.25kg | 300A | 2C |
PVC heat shrink |
balance charge | |
16Ah 22.2v 6s 18C |
11674171XL-16Ah,3.7V, 18C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 186*76*73 | 2.08kg | 280A | 2C |
PVC heat shrink |
balance charge | |
16Ah 25.9v 7s 18C |
11674171XL-16Ah,3.7V, 18C 7s1p |
LiCoO2 lipo |
24.5v-29.4v | (-20℃~60℃) | 186*76*84 | 2.4kg | 280A | 2C |
PVC heat shrink |
balance charge | |
16Ah 44.4v 12s 18C |
11674171XL-16Ah,3.7V, 18C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 186*76*143 | 4.1kg | 280A | 2C |
PVC heat shrink |
balance charge | |
16Ah 51.8v 14s 18C |
11674171XL-16Ah,3.7V, 18C 14s1p |
LiCoO2 lipo |
49V-58.8V | (-20℃~60℃) | 186*76*166 | 4.7kg | 280A | 2C |
PVC heat shrink |
balance charge | |
18Ah 22.2v 6s 15C |
12070178XL-17.5Ah3.7V, 15C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 193*73*76 | 2.11kg | 270A | 2C |
PVC heat shrink |
balance charge | |
18Ah 44.4v 12s 15C |
12070178XL-17.5Ah3.7V, 15C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 193*73*146 | 4.07kg | 270A | 2C |
PVC heat shrink |
balance charge | |
22Ah 22.2v 6s 15C |
11096190XL-22Ah,3.7V, 15C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 201*100*69 | 2.75kg | 320A | 2C |
PVC heat shrink |
balance charge | |
22Ah 25.9v 7s 15C |
11096190XL-22Ah,3.7V, 15C 7s1p |
LiCoO2 lipo |
24.5v-29.4v | (-20℃~60℃) | 201*100*80 | 3.26kg | 320A | 2C |
PVC heat shrink |
balance charge | |
22Ah 44.4v 12s 15C |
11096190XL-22Ah,3.7V, 15C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 201*100*134 | 5.58kg | 320A | 2C |
PVC heat shrink |
balance charge | |
22Ah 51.8v 14s 15C |
11096190XL-22Ah,3.7V, 15C 14s1p |
LiCoO2 lipo |
49V-58.8V | (-20℃~60℃) | 201*100*153.5 | 6.4kg | 320A | 2C |
PVC heat shrink |
balance charge | |
25Ah 23.1V 6S 10C | 10590195SV-25Ah,3.85V,10C 6S1P |
LiCoO₂ lipo |
21-26.4V | (-20℃~60℃) | 206*95*67 | 2.66kG | 240A | 2C |
PVC heat shrink |
balance charge | |
25Ah 46.2V 12S 10C | 10590195SV-25Ah,3.85V,10C 12S1P |
LiCoO₂ lipo |
42-52.8V | (-20℃~60℃) | 206*95*138 | 5.22KG | 240A | 2C |
PVC heat shrink |
balance charge | |
27Ah 22.2v 6s 15C |
11098212XL-27Ah,3.7V, 15C 6s1p |
LiCoO2 lipo |
21V-25.2V | (-20℃~60℃) | 229*101*70 | 3.18kg | 400A | 2C |
PVC heat shrink |
balance charge | |
27Ah 25.9v 7s 15C |
11098212XL-27Ah,3.7V, 15C 7s1p |
LiCoO2 lipo |
24.5v-29.4v | (-20℃~60℃) | 229*101*81 | 3.69kg | 400A | 2C |
PVC heat shrink |
balance charge | |
27Ah 44.4v 12s 15C |
11098212XL-27Ah,3.7V, 15C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 229*101*132 | 6.2kg | 400A | 2C |
PVC heat shrink |
balance charge | |
27Ah 51.8v 14s 15C |
11098212XL-27Ah,3.7V, 15C 14s1p |
LiCoO2 lipo |
49V-58.8V | (-20℃~60℃) | 229*101*143 | 7.2kg | 400A | 2C |
PVC heat shrink |
balance charge | |
Smart Battery | 16Ah 44.4v 12s 18C |
11674171XL-16Ah,3.7V, 18C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 218*162*88 | 4.7kg | 280A | 2C | Aluminum housing |
intelligent BMS controller |
22Ah 44.4v 12s 15C |
11096190XL-22Ah,3.7V, 15C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 246*162*111 | 6.2kg | 320A | 2C | Aluminum housing |
intelligent BMS controller |
|
16Ah 44.4v 12s 18C |
11674171XL-16Ah,3.7V,18C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 218*162*88 | 4.7kg | 280A | 2C | Aluminum housing |
battery level indicator |
|
22Ah 44.4v 12s 15C |
11096190XL-22Ah,3.7V, 15C 12s1p |
LiCoO2 lipo |
42V-50.4V | (-20℃~60℃) | 246*162*111 | 6.2kg | 320A | 2C | Aluminum housing |
battery level indicator |
|
Economic NCM drone battery |
12.5Ah 52v 14s 15C |
10570140PN-12.5Ah, 3.7V 15C 14s1p |
NCM | 49V-58.8V | (-20℃~60℃) | 84*149*185 | 2.55kg | 100A | 1C |
Aluminum housing |
intelligent BMS controller |
20Ah 52v 14s 10C |
PC20N-P-20Ah,3.7V 5C 14S1P |
NCM | 49V-60.9V | (-20℃~60℃) | 246*162*111 | 6.25kg | 100A | 1C |
Aluminum housing |
intelligent BMS controller |
|
20Ah 52v 14s 10C |
PC20N-P-20Ah,3.7V 5C 14S1P |
NCM | 49V-60.9V | (-20℃~60℃) | 92*147*210 | 5.60kg | 100A | 1C |
PVC heat shrink |
balance charge | |
28Ah 52v 14s 10C |
PJ28N-28Ah,3.7V 5C 14s1p |
NCM | 49V-60.9V | (-20℃~60℃) | 246*162*111 | 7.95kg | 140A | 1C |
Aluminum housing |
intelligent BMS controller |
|
28Ah 52v 14s 10C |
PJ28N-28Ah,3.7V 5C 14s1p |
NCM | 49V-60.9V | (-20℃~60℃) | 92*155*250 | 7.45kg | 140A | 1C |
PVC heat shrink |
balance charge | |
Super high energy density type 265Wh/kg |
30Ah 48v 12s 10C |
11098198VV-30Ah,3.9V 5C 12s1p |
NCM | 42V-53.4V | (-20℃~60℃) | 100*139*213 | 6.00kg | 150A | 1C |
PVC heat shrink |
balance charge |
30Ah 48v 12s 10C |
11098198VV-30Ah,3.9V 5C 12s1p |
NCM | 42V-53.4V | (-20℃~60℃) | 246*162*111 | 6.55kg | 150A | 1C |
Aluminum housing |
intelligent BMS controller |
|
Economic 18650 packed drone batteries |
36.8Ah 21.6V 6s 3C | sanyo 18650GA-3500mAh,6S11P |
LiCoO2 lipo |
15V-25.2V | (-20℃~60℃) | 75*125*188 | 3.5Kg | 100A | 1C | PVC |
intelligent BMS controller |
53.6Ah 43.2V 12s 3C | sanyo 18650GA-3500mAh,12S16P |
LiCoO2 lipo |
30V-50.4V | (-20℃~60℃) | 70*140*530 | 10.2Kg | 150A | 1C | PVC |
intelligent BMS controller |
|
33.5A 43.2V 12s 3C | sanyo 18650GA-3500mAh,12S10P |
LiCoO2 lipo |
30V-50.4V | (-20℃~60℃) | 75*205*205 | 6.4Kg | 100A | 1C | PVC |
intelligent BMS controller |